INFORMATION FOR FIXTURE DESIGN The information on the this form will enable us to understand what exactly is your requirement, and how best we can improve the efficiency of your furnace by increasing the component to fixture weight ratio taking into consideration maximum life of the fixtures. Please fill the form and submit it separately for different types of furnaces Company Name: Contact Person: Type of Furnace Normalizing Hardening & Tempering Annealing Sealed Quench Isoannealing Vacuum type CGC Others (please specify) Furnace Manufacturer:     Loading of Furnace: Batch type Continuous Heating chamber dimensions    Length : mm Width   : mm Height  : mm Maximum temperature for Heat Treatment °C. Rated Furnace capacity:     kg Present capacity utilization:     kg Total weight of components kg. Weight of Fixtures  kg. Quenching Medium:    Air Water Oil Polymer If batch type furnace. Loading is by:    Crane; Capacity kg. Charger; Capacity kg. Type of Fixture used: Basket Tray Additional Components of Fixture:   Fixture plates Pillars Spacers Side Plates Others (please specify)      No. Of trays used per batch for: Batch         Nos. Continuous Nos Movement of trays in the furnace:    On Rollers   On carbide bricks Details of BASE TRAY   BASKET 1. Maximum size Length : mm   Width  : mm Height : mm 2. Minimum allowable distance between two consecutive ribs mm 3. Maximum allowable distance between two consecutive ribs mm 4. If the tray moves on rollers, the distance between rollers mm 5. Maximum allowable load kg. 6. Present Grade of HRS used: HH H K HT HU HX MS SS304 SS310 7. Present Life: Months or Working hours 8. Expected Life: Months or Working hours 9. Failure Due to: FIXTURES: Please send the Drawings/Sketches of the components to be heat-treated showing the major dimensions, their weight and the areas where the heat-treatment is critical. Also specify how the component is to be loaded. For e.g. if the component is shaft like, whether it is to be loaded vertically or horizontally or if it is a gear, whether it is to be placed horizontally or vertically. SPECIAL INSTRUCTIONS : Form filled by: